Lucent Technologies 6 - Manual (Page 16)

12 Issue 1 CRCS R6.0 April 1999
Connecting the PC to the MCU
Checking the Modem Settings
The last step before loading the CRCS program requires that you configure and
check the modem connection to the MCU.
1. From Microsoft Windows, select Start—Programs—Accessories—
HyperTerminal.
2. From the HyperTerminal window, click the Hypertrm.exe icon.
Figure 8. HyperTerminal Window Setting
3. Enter Test in the Name field of the Connection Description window and
select the first icon as shown. Click the OK button.
4. Click on Connect Using and select Direct to COM1.