Lucent Technologies 6 - Manual (Page 51)

3800 Series Modem Installation
Issue 1 CRCS R6.0 April 1999 47
The Port Pair Assignments area contains the following field:
n Analog Digital: Enter the port numbers of the modem/TDM pair in a conver-
sion resource. Two port entries are required. Include seven characters for
each entry. Use the following values
3800 Series Modem Installation
3810
The 3810 modem should be installed in permissive mode. Insert a 4-conductor
modular plug into the jack labeled DIAL/LEASED (3820). The following table
shows the 3810 option settings for 9600 bps:
Table 2. Port Assignments
Character
Position
Meaning Value
1-2 cabinet number 01 through 03
3 carrier A through E
4-5 slot number 01 through 20
6-7 circuit number 01 through 32