Lucent Technologies 6 - Manual (Page 48)

44 Issue 1 CRCS R6.0 April 1999
Appendix A: Modem Pooling
Appendix A: Modem Pooling
Administering Modem Pool Groups
The commands in the following table are used to access the Modem Pool Groups
form:
Qualifier “maximum” is the maximum number available in your system configuration.
To change information associated with modem pool groups, follow these steps:
1. From the MCU MT, at the command prompt enter change modem-pool
num.
2. Verify the screen displays the Modem Pool Groups form.
3. Use TAB and RETURN to advance to the fields you want to change.
4. Submit the form.
5. To verify the form, enter display modem-pool num.
Table 1. Modem Pool Groups Command
Action Object Qualifier
add modem-pool num 1 to maximum
change modem-pool num 1 to maximum
display modem-pool num 1 to maximum,
print or schedule
list modem-pool num print or remove
remove modem-pool num 1 to maximum