Lucent Technologies Network Access Module - Manual (Page 59)

B-3
Crossover Cable
Crossover Cable
This RJ-45 crossover cable is used to connect two (and only two) machines using
10baseT Ethernet without the use of a hub. The cable must be fabricated from category
5 unshielded twisted pair. Table B-4 shows the wiring for this cable.
Table B-4 Crossover Cable Wiring
RJ-45 Connector RJ-45 Connector
pin 1 pin 3
pin 2 pin 6
pin 3 pin 1
pin 6 pin 2