Lincoln Electric CLASSIC III SVM 137-A - Manual (Page 76)

Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
TROUBLESHOOTING & REPAIR
F-16 F-16
Classic III and IIID
FIGURE F.2 – MEASURING ROTOR RESISTANCE
6. Working from the left side of the machine,
measure the resistance across the rotor
slip rings.
a. Set the ohmmeter on the low scale (X1).
b. Place one meter probe on one of the
rotor slip rings. Place the other probe on
the other slip ring. See Figure F.2.
c. Check the resistance across the slip
rings. It should read approximately 41
ohms.
ALTERNATOR ROTOR TEST (continued)