Lincoln Electric CLASSIC III SVM 137-A - Manual (Page 8)

Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Section TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
Retur
n to Master TOC
INSTALLATION
A-2 A-2
Classic III and IIID
TECHNICAL SPECIFICATIONS - CLASSIC III AND IIID
INPUT - ENGINE
Manufacturer Description Speed Displacement Ignition Capacities
Classic III: 4 cyl., 4 cycle 1725 RPM 164.7 cu. in. Electric Fuel: 15 gal.
Continental Water-cooled Full load (2700 cc) (57 liters)
TM27 Gasoline
38.9 HP @
1800 RPM Oil: 7 qt.
1700 RPM High idle (6.7 liters)
Classic IIID: 4 cyl., 4 cycle 1350 RPM Water/coolant: 9.3 qt.
Continental Water-cooled Low idle (8.8 liters)
TMD27 Diesel
45 HP @
1700 RPM
RATED OUTPUT - WELDER
Duty Cycle Amps Volts at Rated Amperes
100% Duty Cycle 225 DC Constant Current 29V
50% Duty Cycle 300 DC Constant Current 32V
30% Duty Cycle 350 DC Constant Current 34V
OUTPUT - WELDER AND GENERATOR
Welding Ranges Max. Open Circuit Voltage Auxiliary Power
40-350 Amps DC 98.5 3.0 kVA of 115/230 V, 60Hz Power
26 Amps @ 115 V (1)
13 Amps @ 230 V
PHYSICAL DIMENSIONS
Height Width Depth Weight
Classic III Classic IIID
40.94 in. 24 in. 66.25 in. 1406 lb. 1445 lb.
1040 mm 610 mm 1683 mm 638 kg 657 kg
1
15 amps can be drawn from either half of the receptacle. Total combined load of all receptacles cannot exceed 3.0 kVA.