Operation, Warning – Lincoln Electric INVERTEC SVM161-A User Manual
Page 19
OPERATION
B-3
B-3
INVERTEC® V205-T AC/DC™
REAR CONTROL PANEL
(FIGURE B.1)
• I1: Off/On switch turns on the electric power to
the welder. It has two positions, "O" off, and
"I" on.
------------------------------------------------------------------------
* With "l1" in the "I" (ON) position, the welding machine
is operational and there is voltage between the posi-
tive (+) and negative (-) Terminals in stick welding. In
TIG, the welding process needs a trigger closure
command at the remote control connection. (Usually
via an Arc Start Switch or Foot Amptrol)
* The welder is connected to the supply even if the “l1”
(Power Switch) is in the "O" (Off) position, and there-
fore there are electrically live parts inside the power
source. Carefully follow the instructions given in this
manual.
FIGURE B.1
* 1 : Supply cable
* 2 : Gas attachment
l1 : Power Switch
WARNING