Troubleshooting and repair, Control/display board test (continued) – Lincoln Electric INVERTEC SVM161-A User Manual
Page 64
Advertising
Control/Display Board
FIGURE F.8 – CONTROL/DISPLAY BOARD LOCATION
CONTROL/DISPLAY BOARD TEST (continued)
PROCEDURE
1. Remove input power to the V205-T machine.
2. Using a phillips head screwdriver, remove the
case wraparound cover.
3. Perform the Capacitor Discharge Procedure
detailed earlier in this section.
4. Locate the control/display board and associat-
ed plugs . Do not remove plugs from the
board. See Figure F.8.
5. Carefully apply the correct input voltage to the
V205-T and check for the correct secondary
voltages per Tables F.2, F3 & F.4.
TROUBLESHOOTING AND REPAIR
F-24
F-24
INVERTEC® V205-T AC/DC™
Advertising