Accessories, Optional accessories – Lincoln Electric INVERTEC SVM161-A User Manual
Page 30
ACCESSORIES
C-2
C-2
INVERTEC® V205-T AC/DC™
OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Twist-Mate Cable Connectors
1 – standard for Ground Clamp
1 – Gas Pass through for Tig Torch
Strap Packet
Instruction Manual
Field Installed
K857 - Remote Output Control - For Stick welding.
When the V205-T’s Output Control is in the "REMOTE"
position, this portable current control provides the
same range as the current control on the welder.
Consists of a 6-pin Amphenol connector which plugs
into the remote control Amphenol. 25 foot cable length.
K870 - Foot Amptrol
tm
for TIG welding. When the
V205-T’s Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Foot Amptrol connects directly to
the 6 pin Amphenol.
K963-3 - Hand Amptrol
tm
for TIG welding. When the
V205-T’s Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls the
output remotely. The Hand Amptrol connects directly to
the 6 pin Amphenol.
K814 - Arc Start Switch - Energizes the output for TIG
welding if remote output control of the amperage is not
desired. It allows on/off TIG welding at the current set
by the Current Control on the control panel. When
using the Arc Start Switch set the Output Control to the
“LOCAL” position.
Magnum® PTA-9 and PTA-17 TIG Torches - The fol-
lowing standard Magnum® TIG torches with one-piece
cable may be used with the Invertec® V205-T.
• K1781-1
PTA-9 12.5 ft medium back cap
• K1781-3
PTA-9 25 ft
medium back cap
• K1782-1
PTA-17 12.5 ft long back cap
• K1782-3
PTA-17 25 ft
long back cap
NOTE: Each torch requires a Twist-Mate adapter, (one
is included with the machine). Collets, collet
bodies, and nozzles are not included and must
be ordered separately.
TIG TORCH KITS
K2266-1 – TIG-Mate 17 Air Cooled TIG Torch Starter
Pack. One complete easy-to-order kit packaged in its
own portable carrying case. Includes: PTA-17 torch,
parts kit, Harris flowmeter/regulator, 10 ft. gas hose,
Twist-mate™ adapter, work clamp and cable.
K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch
Starter Pack. One complete easy-to-order kit pack-
aged in its own portable carrying case. Includes: PTW-
20 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas
hose, Twist-Mate™ adapter, work clamp and cable,
and 10 ft. water hose.
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches to
welding cable to provide quick disconnect from
machine.
Twist-Mate Torch Adapter K1622-1 - One is shipped
with the welder torch. If you do not care to interchange
this part between torches (one is required to connect
Magnum PTA-9 or PTA-17 TIG torches with one-piece
cable to the V205-T) you may order an additional
adapters. The quick connect plug provides connection
for both gas and welding current.
K1622-4 – Twist-Mate adapter for Water-Cooled TIG
torches. Adapter for PTW-18 and -20 Torches.
TIG Torch Parts Kits - Parts kits are available for the
PTA-9 and PTA-17 TIG torches. These kits include
back cap, collets, collet bodies, nozzles and tungstens.
Order KP507 for PTA-9 torches
Order KP508 for PTA-17 torches
See publication E12.150 for parts kits breakdown.
Cut Length Consumables - TIG welding filler metals
are available for welding stainless steel, mild steel, alu-
minum and copper alloys. See publication C9.10.