Light & Motion DSR-PD150 - Manual (Page 115)

115
“
Memory Stick
”
Operations
Using a “Memory Stick” – introduction
Inserting a “Memory Stick”
Insert the “Memory Stick” with the Sony logo pointing toward the LCD panel and the b
mark pointing inward.
To eject a “Memory Stick”
Push the “Memory Stick” inward, then release your finger. The “Memory Stick” comes
out a little.
Note
The “Memory Stick” may pop out depending on the way you push it.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Do not turn the power off , eject a “Memory
Stick” or remove the battery pack. Otherwise, image data breakdown may occur.
If the “ MEMORY STICK ERROR” indicator appears
The “Memory Stick” is broken or the file format is not proper. Eject the “Memory
Stick,” check it, and insert it again. If the same indicator appears, use another “Memory
Stick.”
Access lamp