Light & Motion DSR-PD150 - Manual (Page 116)

116
Using a “Memory Stick” – introduction
Selecting the image quality mode
You can select the image quality mode in still picture recording. The default setting is
SUPER FINE.
(1) Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the right (unlock) position.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
Image quality settings
Setting Meaning
SUPER FINE This is the highest image quality in this camcorder. The
number of still images you can record is fewer than FINE.
The image is compressed to about 1/3.
FINE Use this mode when you want to record high quality images.
The image is compressed to about 1/6.
STANDARD This is the standard image quality. The image is compressed
to about 1/10.
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the types of images you are shooting.
1
2
3
4
5
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
[MENU] : END
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[MENU] : END
SUPER F I NE
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[MENU] : END
SUPER F I NE
F I NE
STANDARD
MEMORY
CAMERA
VCR
OFF (CHG)
POWER
MENU