Light & Motion DSR-PD150 - Manual (Page 135)

135
“
Memory Stick
”
Operations
Preventing accidental erasure
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the right (unlock) position.
(2) Play back the image you want to protect (p. 129).
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PROTECT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU to erase the menu display. The “-“ mark is displayed beside
the data file name of the protected image.
To cancel image protection
Select OFF in step 6, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
When the auto logo insert function is activated
You cannot use this function.
1 1
3,7 4
5
6
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
[MENU] : END
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[MENU] : END
OFF
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[MENU] : END
ON
OFF
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[MENU] : END
ON
10 / 15 10 / 15
10 / 15
MEMORY
CAMERA
VCR
OFF (CHG)
POWER
MENU