Light & Motion DSR-PD150 - Manual (Page 71)

71
Advanced Playback Operations
Playing back a tape with digital effects
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In playback or playback pause mode, press DIGITAL EFFECT and turn the
SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH,
LUMI. or TRAIL) flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the bars appear. In STILL or LUMI.
mode, the picture is captured and is stored in memory as a still picture at the
time you press the SEL/PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 39.
To cancel the digital effect function
Press DIGITAL EFFECT so that the indicator disappears.
Notes
•You cannot process a picture using the digital effect function that is input from other
equipment.
•To record pictures that you have processed using the digital effect function, record the
pictures on the VCR, using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function will be automatically canceled.
STILL
2
3
1
STILL
DIGITAL
EFFECT