Light & Motion DSR-PD150 - Manual (Page 12)

12
Step 2 Preparing the power supply
Notes
•Prevent metallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This may cause a short-circuit, damaging the AC power adaptor.
•Keep the battery pack dry.
•When the battery pack is not to be used for a long time, charge the battery pack once
fully, and then use it until it fully discharges again. Keep the battery pack in a cool place.
Until your camcorder calculates the actual remaining battery time
“- - - - min” appears in the display window.
While charging the battery pack, no indicator appears or the indicator flashes in
the display window in the following cases:
– The battery pack is not installed correctly.
– The AC power adaptor is disconnected.
– Something is wrong with the battery pack.
Charging time
Battery pack Full charge (Normal charge)
NP-F330 (supplied) 150 (90)
NP-F530/F550 210 (150)
NP-F730/F730H/F750 300 (240)
NP-F930/F950
390 (330)
NP-F960 420 (360)
Approximate minutes to charge an empty battery pack
Recording time
Recording with Recording with
Battery pack the viewfinder the LCD screen
Continuous* Typical** Continuous* Typical**
NP-F330 (supplied) 60 (55) 30 (30) 50 (45) 25 (25)
NP-F530 100 (90) 55 (50) 85 (75) 45 (40)
NP-F550 130 (115) 70 (60) 110 (100) 60 (55)
NP-F730 230 (205) 125 (110) 190 (170) 105 (95)
NP-F730H/F750 265 (235) 145 (130) 230 (200) 125 (110)
NP-F930 355 (320) 195 (175) 300 (270) 165 (150)
NP-F950 405 (360) 225 (200) 345 (310) 190 (170)
NP-F960 480 (430) 265 (240) 420 (375) 235 (210)
Approximate minutes of recording time when you use a fully charged battery