Recording a picture, Monitoring the playback picture on the lcd screen, P. 16) – Light & Motion DSR-PD150 User Manual
Page 5: P. 26)
5
Quick Start Guide
Recording a picture
(p. 16)
Viewfinder
When the LCD panel
is closed, use the
viewfinder placing
your eye against its
eyecup.
1
Remove the hood cap.
2
Set the POWER switch to
CAMERA while pressing the
small green button.
If the ND1 or ND2 indicator
flashes, see page 46.
3
Slide OPEN
back in the B
mark direction
to open the
LCD panel.
Monitoring the playback picture on the LCD
screen
(p. 26)
1
Set the POWER switch to
VCR while pressing the
small green button.
2
Press m to rewind
the tape.
3
Press N to start
playback.
NOTE
Do not pick up your camcorder by
holding the viewfinder, the LCD panel,
the battery pack, or the microphone.
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
4
Press START/
STOP. Your
camcorder
starts
recording. To
stop recording,
press START/
STOP again.
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
REW
PLAY
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
OPEN