Lanier 5227 - Manual (Page 62)

Multi Direct Print
6 - 2 Additional Functions
1. Printer Name
The contents of this list are different for TCP/IP and NetBEUI protocols. If you selected [TCP/
IP], the printer name of the Network Interface Card appeared. If you selected [NetBEUI], the
computer name of the Network Interface Card appeared.
Note: The printer name can be found on the printer configuration page.
Note: The printer name is set to “RNP” and the last 6 digits of the MAC address
of the Network Interface Card. For example, a board with a MAC address of
00:00:74:62:5C:65, would be named RNP625C65. You can change this name to
something more convenient.
2. Address
The contents of this list are different for TCP/IP and NetBEUI protocols. If you selected [TCP/
IP], the printer name of the Network Interface Card appeared. If you selected [NetBEUI], the
computer name of the Network Interface Card appeared.
Note: The form of the Network path name is “%% computer name \ name of
printer type”.
3. Comments
Comments that are registered on the Network Interface Card .
4.
[Refresh]
Click to refresh the contents of the display. When refreshing, the name of this button changes
to [Stop]. Click on it to stop the refresh.
5. [About]
Version and copyright information.
6. Protocol
Select to display the printers which can print using the selected protocol.