Lanier 5227 - Manual (Page 83)

Message List
Additional Functions 6 - 23
Netware - When the Networking Interface Board is Started
When Working as a Print Server
When Working as a Remote Printer
Item Name Description
Access to NetWare server File server
name denied. Either there is no account
for this print server on the NetWare
server or the password was incorrect. Cannot log in to the file server. Confirm
that the print server is registered on the
file server. If a password is specified for
the print server, delete it.
Attach to print queue print queue name. Attach to the print queue.
File server is empty The file server is not registered. Register
your file server using the utility.
Login to file server “file server name”
(NDS/BINDERY) Logged in to the file server with NDS or
BINDERY mode.
Open log file “file name” Specified log file has been opened.
Printer: printer name” has no queue The print queue is not assigned to the
printer. Using NWAdmin, assign the
print queues to the printer and then
restart it.
Print queue “print queue name” cannot
be serviced by printer 0, “print server
name” Print services are not available for the
print queue. Confirm the volume of the
print queue exists on the specified file
server.
The print server received error “error
number” during attempt to log in to the
network. Access to the network was
denied. Verify that the printer server
name and password are correct. Cannot log in to the file server. The print
server is not registered or the password
is specified. Register the print server
with out specifying a password.
Item Name Description
Cannot create service connection Cannot establish a connection with the
file server. Your request may exceed the
maximum number of connections that
the file server can deal with at a time.
Cannot find rprinter (“print server
name”/”printer number”) Printer having the number of displayed
on the print server does not exist.
Confirm the number of the printer
register to the print server.
Establish a connection with the printer
server, “print server name”. Connection with the printer server has
been established.