Lanier 5227 - Manual (Page 86)

Message List
6 - 26 Additional Functions
When Using SNMP
Item Name Description
Exit snmpd The agent is complete. Reset the printer
or turn the printer off and on.
recvfrom: packet discarded, length
(reception packet length) > (Packet
size), from addr <Address of partner
point> The received packet was ignored since
the length of the packet exceeds the
limit. Confirm whether the administrator
station sent a packet whose length is
longer than 1025 bytes.
session <Community name appointed>
Name> from <Address> The community name of the received
packet is not defined. Confirm that the
community name of the administration
station is the same as that specified to
the printer.
snmpin: Bad use of session
<community Name> from <Address> The community name of the received
packet is not the same as that of the
administration station. Confirm the
community name specified to the
printer.
snmpin: error in snmpdecipher, code
(<ErrorNo.>) An error occurred on the received
packet. Check if the number of the
objects sent from the administration
station ism ore than 31 and if there are
wrong MIB requests.
snmpin: error in snmpservsend, code
(<ErrorNo.>) Cannot send a response packet.
Normally this message is followed by
other messages.
snmpin:pkt too large,code (<Error
number>) The response packet to the request is
too big to send. Reduce the number of
the objects per request.
snmpin: error in sending too large
request back,code (<Error
number>),giving up The packet notifying the error is too big
to send. Reduce the number of the
objects per request.
snmpin:received bad version The version of the received packet is
invalid. Confirm that the version of the
administration station is the version -
1(0).