Lanier 5227 - Manual (Page 63)

Multi Direct Print
Additional Functions 6 - 3
Network
5
1. Host name
If you print, using the TCP/IP protocol, to select a printer using a host name or a domain name,
enter the name here. In-put the IP address into the [IP address] box when selecting a printer by
IP ad-dress.
You cannot use a host name that begins with “%%”.
Note: When you use DHCP to assign IP ad-dresses to Network Interface Cards,
you can use a printer name (Current Host name on the network configuration
page) as the host name.
2. IP address
If you print, using the TCP/IP protocol. Enter the IP address of the printer.
3.
Printer name
Enter the printer's Network path name in form of “%%Computer name \Share name”. Do not
enter “\\” as head characters but “%%”.
When you select a printer with the [Select Printer] dialog, the Port name is entered
automatically.
1
2
3