Lanier 5227 - Manual (Page 87)

Precautions
Additional Functions 6 - 27
Precautions
Connecting a Dial Up Router to a Network
Correspondence Method on Network Administration
Filter the packets so that they do not pass over the dial up router.
•
The MAC address of the printer doing the filtering is printed on the printer configuration
page. Refer to the Operating Instructions for information on printing a configuration
page.
•
See the instructions below for information on configuring the printer if the router cannot
be configured.
Correspondence Method by Configuration of Printer (when using NetWare)
1
Following the setup method in this manual, configure the file server.
2
Set the frame type for a NetWare environment.
Correspondence Method by Configuration of Printer (when not using
NetWare)
1
While not printing, the Network Interface Card sends packets on the net-work. Set the
NetWare to inactive.
When Printing PostScript from Windows
When printing PostScript from Windows, refer to the Operating Instructions that comes with the
optional PostScript 3, and configure using the Network Interface Card with your printer driver.
When Printing with Netware
Configuration of Form Feed
When using NetWare, it is not necessary to configure for form feed. However, should not want to
perform form feed, configure according to OS as follows.
•
In case of Windows 3.1x, remove a check of [Form feed] in [Network Settings] dialog.
•
In case of Windows95/98, you remove a check of [Form feed] with [Printer Settings] tab
of property of printer.
Configuration of Banner Page
Please do not configure of banner page on NetWare. If you do not want to add the banner page,
configure according to OS using it as follows.
•
In case of Windows 3.1x, remove a check of [Enable banner] in [Network Settings]
dialog.