Lanier 5227 - Manual (Page 18)

Configuring Windows 95/98
2 - 4 Windows 95/98 Configuration
Installing the Multi Direct Print Application
1
Insert the CD-ROM that comes with the printer into your computer's CD-ROM drive.
•
If the installer starts automatically, you can use it to install Multi Direct Print, and set up
the printer driver, and then go to procedure 6.
2
Open [Control Panel], and double click the [Add/Remove Programs] icon.
3
In the [Install/Uninstall] tab, click [Install].
4
Click [Next >].
5
Enter the name of the CD-ROM drive in the [Command line for installation pro-gram] box,
followed by “:\NETWORK\MDP\DISK1\SETUP” (do not include the quotation marks),
and then click [Finish].
Note: An example would be “D:\NETWORK\MDP\DISK1\SETUP” when the
drive letter is “D”.
6
After the [Welcome] dialog appears, click [Next >].
7
After the [Setup Complete] dialog appears, click [Yes, I want to restart my computer now.],
and click [Finish].
•
The computer restarts, and Multi Direct Print can now be used. If you select “No”, be
sure to restart the computer manually before starting Multi Direct Print for the first time.
Follow these instructions to install Multi Direct Print.
Preparation:
You must restart the computer after installing Multi Direct Print. Be sure to close all
applications before beginning the installation process.
Note: You must install Multi Direct Print and the appropriate printer driver in
order to print. If you print, using the TCP/IP protocol, to be able to browse the
printer via the network, PRINTER MANAGER FOR CLIENT needs to be
installed. If the installer starts automatically with the AutoRun program, you
can install both of these programs. For more information on how to install these
programs, refer to the Operator Guide for your printer.