Lantronix XPort - Manual (Page 20)

Getting Started
Server Properties
You can change the server properties by editing any of the fields. Holding the cursor
over a field displays a help message for that field. If you change the IP address, you
must enter the new IP address in the browser to reload the page.
In the Telnet Password field, enter a password to prevent unauthorized access to
the Setup Mode via a Telnet connection to port 9999. The password is limited to 4
characters. (An enhanced password setting of 16 characters is available under
Security Settings on the Telnet Setup Mode window.)
Note: You do not need a password to access the Setup Mode window via a
serial connection.
Port Properties
Serial Port Settings
Serial Protocol
RS232
Note: RS-232 is the only available option for XPort.
Speed 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Character Size 8, 7
Parity None, Even, Odd
Stop Bit 1,2
Flow Control None, XON/XOFF, XON/XOFF Pass Characters to Host, CTS/RTS
(Hardware)
3-6 XPort™ User Guide