Pioneer DEH-P55BT - Manual (Page 21)

Playing a CD
1 1 1 1 2 2 2 2
3 3 3 4 4 4
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track number currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
4 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
1 Press SOURCE to select the built-in CD
player.
Press
SOURCE until you see COMPACT DISC
displayed.
# If no disc is loaded in the unit, you cannot se-
lect
COMPACT DISC (built-in CD player). Insert a
disc in the unit. (Refer to page 12.)
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
# If you select ROUGH, pushing and holding
MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc. (Refer
to Selecting the search method on page 23.)
3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing
MULTI-CONTROL right skips to the
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Built-in CD Player
En
21
English
Section
06