Pioneer DEH-P55BT - Manual (Page 48)

Note
If you turn random play on during RPT :DSC and
then return to the playback display, DRDM ap-
pears in the display.
Scanning CDs and tracks
While you are using RPT :DSC, the beginning
of each track on the selected disc plays for
about 10 seconds. When you are using
RPT :MCD, the beginning of the first track of
each disc is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
3 Push MULTI-CONTROL up to turn scan
play on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4 When you find the desired track (or
disc) push MULTI-CONTROL down to turn
scan play off.
The track (or disc) will continue to play.
# If the display has automatically returned to
the playback display, select
SCAN again by press-
ing FUNCTION.
Notes
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during RPT:MCD and
then return to the playback display, DSCN ap-
pears in the display.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2 Push MULTI-CONTROL up to turn pause
on.
Playback of the current track pauses.
# To turn pause off, push MULTI-CONTROL
down.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Press FUNCTION and hold until TITLE IN
appears in the display, then press
FUNCTION to select ITS.
After
TITLE IN is displayed, press FUNCTION
repeatedly, the following functions appear in
the display:
Multi-CD Player
En
48
Section
09