Pioneer DEH-P55BT - Manual (Page 31)

Hands-free phoning with
cellular phones featuring
Bluetooth wireless technology
1 1 1
3 3 3 4 4 4
2 2 2
5 5 5 6 6 6
If your cellular phone features Bluetooth wire-
less technology, you can connect to this unit
for hands-free, wireless calls, even while driving.
Important
! Prior to use, register your cellular phone fea-
turing Bluetooth wireless technology to this
unit. For details, refer to Registering your cellu-
lar phone on page 35.
! Since this unit is on standby to connect with
your cellular phones via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
! When phone is selected as a source, no audio
adjustments, except balance adjustment and
source level adjustment, are possible.
These are the basic steps necessary to make
use of cellular phones featuring Bluetooth
wireless technology. More advanced hands-
free phoning operation is explained starting
on Introduction of advanced hands-free phon-
ing operation on page 34.
1 Calendar display
Shows the date, month and year.
2 Clock display
Shows the time.
3 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
! If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
4 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
! Depending on the cellular phones featur-
ing Bluetooth wireless technology, radio
field intensity is not available. In this
case, the signal level indicator does not
appear.
5 Automatic answering indicator
Shows when the automatic answering func-
tion is on (for more details, refer to Setting
the automatic answering on page 44).
6 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
% Press SOURCE to select the telephone.
Press
SOURCE until you see TELEPHONE dis-
played.
# You can also select the telephone by pressing
ON HOOK on the head unit, or PHONE on the re-
mote control.
# You cannot use ON HOOK on the remote con-
trol.
Notes
! This unit’s phone call reception is on standby
when ignition switch is set to ACC or ON.
Bluetooth Telephone
En
31
English
Section
08