Pioneer DEH-P55BT - Manual (Page 43)

Making a call by entering
phone number
You can make a call by directly entering phone
numbers on this unit.
1 Press FUNCTION to select
NUMBER DIAL.
Press
FUNCTION until NUMBER DIAL ap-
pears in the display.
2 Push MULTI-CONTROL up or down to
select a number.
Pushing
MULTI-CONTROL up repeatedly
changes numbers in 1 2 3 ... 9 0 + order.
Pushing it down changes in + 0 9 ... 3 2 1
order.
3 Push MULTI-CONTROL right to move
the cursor to the next position.
When the number you want is displayed, push
MULTI-CONTROL right to move the cursor to
the next position and then select the next
number. Push
MULTI-CONTROL left to move
backwards in the display.
# Up to 24 digits can be entered.
4 If you have completed entering the
number, press OFF HOOK to make a call.
While calling,
DIALLING is flashing.
5 Press ON HOOK to end the call.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Echo canceling and noise
reduction
When you are operating hands-free phoning
in the vehicle, you may hear undesired echo.
This function reduces the echo and noise and
keeps a certain sound quality.
! This feature cannot be set for each different
user phone.
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to select
ECHO CANCEL.
After phone user setting is displayed, press
FUNCTION until ECHO CANCEL appears in
the display.
2 Push MULTI-CONTROL up to turn echo
canceling on.
ECHO CANCEL :ON appears in the display.
# To turn echo canceling off, push
MULTI-CONTROL down.
Changing the ring tone
The unit offers you to turn the ring tone for in-
coming calls on or off.
! The ring tone you select for this unit has no
effect on the ring tone used by your phone.
If you do not want your phone and this unit
to ring at the same time, we recommend
you turn the ring tone of one or the other
off.
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to select
RING TONE.
After phone user setting is displayed, press
FUNCTION until RING TONE appears in the
display.
2 Push MULTI-CONTROL left or right to
select the desired ring tone.
Each time
MULTI-CONTROL is pushed left or
right, the ring tone is selected in the following
order:
OFF (ring tone off)
—1 (ring tone 1)—2 (ring
tone 2)
—3 (ring tone 3)
Bluetooth Telephone
En
43
English
Section
08