Pioneer DEH-P55BT - Manual (Page 60)

Note
If you make adjustments, CUSTOM curve is up-
dated.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 Press AUDIO to select the band for ad-
justment from among low, mid and high.
Press
AUDIO repeatedly to switch between
the following functions:
Low
—Mid—High
3 Push MULTI-CONTROL left or right to
select the desired frequency.
Each time
MULTI-CONTROL is pushed left or
right, frequencies are selected in the following
order:
Low:
40
—80—100—160 (Hz)
Mid: 200
—500—1k—2k (Hz)
High: 3k
—8k—10k—12k (Hz)
4 Push MULTI-CONTROL up or down to
select the desired Q factor.
Each time
MULTI-CONTROL is pushed up or
down, Q factor is selected in the following
order:
2N
—1N—1W—2W
Note
If you make adjustments, CUSTOM curve is up-
dated.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the dis-
play.
2 Push MULTI-CONTROL up to turn loud-
ness on.
Loudness level (e.g.,
MID) appears in the dis-
play.
# To turn loudness off, push MULTI-CONTROL
down.
3 Push MULTI-CONTROL left or right to
select a desired level.
Each time
MULTI-CONTROL is pushed left or
right, level is selected in the following order:
LOW (low)
—MID (mid)—HI (high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press AUDIO to select SUB W.
Press AUDIO until SUB W appears in the dis-
play.
# When the subwoofer controller setting is
P/O :FUL, you cannot select SUB W.
2 Push MULTI-CONTROL up to turn sub-
woofer output on.
SUB W:NOR appears in the display. Subwoo-
fer output is now on.
Audio Adjustments
En
60
Section
12