Pioneer DEH-P55BT - Manual (Page 22)

Introduction of advanced
built-in CD player operation
1 1 1 1
1 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)
—RDM (random play)—
SCAN (scan play)
—PAUSE (pause)—COMP
(compression and BMX)
—FF/REV (search
method)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are two repeat play ranges for the built-
in CD player:
RPT :DSC (disc repeat) and
RPT :TRK (one-track repeat).
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Push MULTI-CONTROL left or right to
select the repeat range.
This switches you to the selected setting.
! RPT:DSC – Repeat the current disc
! RPT:TRK – Repeat just the current track
Note
If you perform track search or fast forward/re-
verse during
RPT :TRK, the repeat play range
changes to RPT :DSC.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
2 Push MULTI-CONTROL up to turn ran-
dom play on.
Tracks will play in a random order.
# To turn random play off, push
MULTI-CONTROL down.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
2 Push MULTI-CONTROL up to turn scan
play on.
The first 10 seconds of each track is played.
3 When you find the desired track push
MULTI-CONTROL down to turn scan play
off.
The track will continue to play.
Built-in CD Player
En
22
Section
06