Pioneer DEH-P55BT - Manual (Page 54)

Introduction of advanced
iPod adapter operation
1 1 1 1
1 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)
—SHFFL (random play)—
PAUSE (pause)
—MUSIC (browse)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
For playback of the songs on the iPod, there
are two repeat play ranges:
RPT :ONE (repeat
one song) and RPT :ALL (repeat all songs in
the list).
! While RPT is set to RPT:ONE, you cannot
select the other songs.
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Push MULTI-CONTROL left or right to
select the repeat range.
Push
MULTI-CONTROL left or right until the
desired repeat range appears in the display.
! RPT:ONE – Repeat just the current song
! RPT:ALL – Repeat all songs in the selected
list
Playing songs in a random
order (shuffle)
For playback of the songs on the iPod, there
are two random play methods:
SHFFL :SNG
(play back songs in a random order) and
SHFFL :ALB (play back albums in a random
order).
1 Press FUNCTION to select SHFFL.
Press FUNCTION until SHFFL appears in the
display.
2 Push MULTI-CONTROL left or right to
select your favorite setting.
Each time
MULTI-CONTROL is pushed left or
right, settings are selected in the following
order:
SHFFL :OFF
—SHFFL :SNG—SHFFL :ALB
! SHFFL :SNG – Play back songs in a random
order within the selected list
! SHFFL :ALB – Select an album randomly,
and then play back all the songs in it in
order
Pausing a song
Pause lets you temporarily stop playback of a
song.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
Playing songs on iPod
En
54
Section
10