Tv tuner watching the television, Storing and recalling broadcast stations, Watching the television – Pioneer DEH-P55BT User Manual

Page 56: Tv tuner

Advertising
background image

Watching the television

1

1

1

1

2

2

2

2

3

3

3

3

4

4

4

5

5

5

You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner

’s operation manual. This section pro-

vides information on TV operations with this
unit which differs from that described in the
TV tuner

’s operation manual.

1 Band indicator

Shows which band the TV tuner is tuned to.

2 Preset number indicator

Shows which preset has been selected.

3 Channel indicator

Shows which channel the TV tuner is tuned.

4 Battery strength indicator

Shows the battery strength of cellular
phone.
! Battery strength indicator may differ

from the actual battery strength.

5 Signal level indicator

Shows the signal strength of cellular phone.
! Signal level indicator may differ from the

actual signal level.

1

Press SOURCE to select the TV.

Press

SOURCE until you see TELEVISION dis-

played.

2

Press BAND to select a band.

Press

BAND until the desired band is dis-

played,

TV1 or TV2.

3

To perform manual tuning, push

MULTI-CONTROL left or right.
The channels move up or down step by step.

4

To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.

Storing and recalling
broadcast stations

If you press any of the preset tuning buttons
1

–6, you can easily store up to six broadcast

stations for later recall with the touch of a but-
ton.

% When you find a station that you want
to store in memory, press one of preset
tuning buttons 1

–6 and hold until the pre-

set number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.

Notes

! Up to 12 stations, six for each of two TV bands

can be stored in memory.

! You can also recall station assigned to preset

tuning buttons

1

–6 by pushing

MULTI-CONTROL up or down.

TV tuner

En

56

Section

11

Advertising