Pausing cd playback, Using compression and bmx, Selecting the search method – Pioneer DEH-P55BT User Manual

Page 23: Searching every 10 tracks in the current, Disc, Searching every 10 tracks in the current disc, Built-in cd player

Advertising
background image

# If the display has automatically returned to
the playback display, select

SCAN again by press-

ing

FUNCTION.

Note

After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.

1

Press FUNCTION to select PAUSE.

Press

FUNCTION until PAUSE appears in the

display.

2

Push MULTI-CONTROL up to turn pause

on.
Playback of the current track pauses.

# To turn pause off, push MULTI-CONTROL
down.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit. Each of the functions has a
two-step adjustment. The COMP function bal-
ances the output of louder and softer sounds
at higher volumes. BMX controls sound rever-
berations to give playback a fuller sound. Lis-
ten to each of the effects as you select
through them and use the one that best en-
hances the playback of the track or CD that
you are listening to.

1

Press FUNCTION to select COMP.

Press

FUNCTION until COMP appears in the

display.

2

Push MULTI-CONTROL up or down to

select your favorite setting.
Push

MULTI-CONTROL up or down repeatedly

to switch between the following settings:
COMP OFF

—COMP 1—COMP 2—

COMP OFF

—BMX 1—BMX 2

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.

1

Press FUNCTION to select FF/REV.

Press

FUNCTION until FF/REV appears in the

display.

# If the search method ROUGH has been pre-
viously selected,

ROUGH will be displayed.

2

Push MULTI-CONTROL left or right to

select the search method.
Push

MULTI-CONTROL left or right until the

desired search method appears in the display.

! FF/REV – Fast forward and reverse
! ROUGH – Searching every 10 tracks

Searching every 10 tracks in
the current disc

If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
many tracks, you can roughly search for the
track you want to play.

1

Select the search method ROUGH.

Refer to Selecting the search method on this
page.

Built-in CD Player

En

23

English

Section

06

Advertising