Panasonic KX-FT78HK - Manual (Page 33)

Caller ID
-33-
Caller ID Caller ID service from your phone company
This unit is compatible with the Caller ID
service offered by your local telephone
company. To use this feature, you must
subscribe to a Caller ID service.
Important:
L This unit will only display the caller’s
telephone number or name.
L This unit will not support future
additional telephone services.
L This unit cannot support services
based on the “DTMF based
subscriber line protocol”.
L Depending on the service of the local
telephone company, the date/time of
the call or caller’s name may not be
displayed.
Change the following ring settings to 2
or more rings beforehand.
– TAD ring setting (feature #06 on page
70) (KX-FT78 only)
– FAX ring setting (feature #07 on page 70)
– TEL/FAX ring setting (feature #09 on
page 70)
How Caller ID is displayed
The calling party’s telephone number or
name will be displayed after the first ring.
You then have the option of whether or not
to answer the call depending on the caller.
The unit will automatically store the caller
information (telephone number, name and
the time of the call). You can print the caller
ID list.
Note:
L If the name display service is not offered
by your local telephone company, only
the telephone number will be displayed.
To confirm caller information using
the Caller ID list
The unit will store information for the most
recent 20 callers.
– To print manually, see page 88.
– To print automatically after every 20 new
calls, activate feature #26 (page 72).
FT74-78HK.book Page 33 Friday, June 28, 2002 9:45 AM