Panasonic KX-FT78HK - Manual (Page 74)

Features Summary
-74-
Code #47 (KX-FT78 only): Setting the
voice guidance
VOICE GUIDANCE
If you wish to hear voice guidance, activate
this feature.
ON (default): You will hear the friendly
reception voice guide, pre-recorded
messages and voice time/day stamp.
OFF: Deactivated this feature.
Code #49: Setting the auto
disconnection
AUTO DISCONNECT
To answer a call with an extension
telephone in TEL/FAX mode (page 50),
activate this feature and program the code.
1. Follow steps 1–4 on page 69.
2. Press {+} or {-} to select “ON”.
3. Press {SET}.
4. Enter your code from 2 to 4 digits, using
0–9 and *.
L The default code is “
@
0”
5. Press {SET}.
6. Press {MENU}.
Code #54 (KX-FT78 only): Changing the
recording time for your own TAD/FAX
greeting message
GREETING TIME
16s (default): Up to 16 seconds.
60s: Up to 60 seconds.
See page 59 for details.
Code #58: Setting the original mode
ORIGINAL
To send or copy a document with faint or
dark writing, set this feature before starting
transmission or copying.
NORMAL (default): Used for normal
writing.
LIGHT: Used for faint writing.
DARKER: Used for dark writing.
Code #60 (KX-FT78 only): Setting the
message transfer
MESSAGE TRANS.
To transfer a recorded incoming message
to another telephone (page 67), activate
this feature and program the transfer
telephone number.
1. Follow steps 1–4 on page 69.
2. Press {+} or {-} to select “ON”.
3. Press {SET}.
4. Enter the transfer telephone number.
5. Press {SET}.
6. Press {MENU}.
Code #61 (KX-FT78 only): Checking,
recording or erasing the transfer
greeting message
TRANS-GREETING
See page 67, 68 for details.
Code #67 (KX-FT78 only): Setting the
incoming message monitor
ICM MONITOR
To hear an incoming message (ICM) from
the speaker when the answering device is
recording the message.
ON (default): You can monitor the
incoming message.
OFF: Deactivated this feature.
FT74-78HK.book Page 74 Friday, June 28, 2002 9:45 AM