Panasonic KX-FT78HK - Manual (Page 70)

Features Summary
-70-
Basic features
Code #01: Setting the date and time
SET DATE & TIME
See page 22 for details.
Code #02: Setting your logo
YOUR LOGO
See page 23 for details.
Code #03: Setting your fax number
YOUR FAX NO.
See page 25 for details.
Code #04: Printing the sending report
SENDING REPORT
To print and check the sending report for fax
transmission results (page 38).
ERROR (default): The sending report will
be printed only when fax transmission fails.
ON: The sending report will be printed out
after every transmission.
OFF: The sending report will not be printed
out.
Code #05 (KX-FT74 only): Changing the
receiving mode in the auto answer mode
AUTO ANSWER
FAX ONLY (default): Facsimile Only mode
(page 47)
TEL/FAX: Telephone/Facsimile mode
(page 48)
Code #05 (KX-FT78 only): Changing the
receiving mode in the auto answer mode
AUTO ANSWER
TAD/FAX (default): Telephone Answering
Device/Facsimile mode (page 57)
FAX ONLY: Facsimile Only mode (page
47)
TEL/FAX: Telephone/Facsimile mode
(page 48)
Code #06 (KX-FT78 only): Changing the
ring setting in TAD/FAX mode
TAD RING COUNT
To change the number of rings before the
unit answers a call in TAD/FAX mode. You
can select from 1, 2 (default), 3, 4, “TOLL
SAVER” and “RINGER OFF”. See page 57
for details.
Code #07: Changing the ring setting in
FAX ONLY mode
FAX RING COUNT
To change the number of rings before the
unit answers a call in FAX ONLY mode. You
can select from 1, 2 (default), 3 and 4.
Code #09: Changing the TEL/FAX
delayed ring setting
TEL/FAX RING
If you use an extension telephone in
TEL/FAX mode, select the desired number
of rings of the extension telephone. You can
select from 1, 2 (default), 3 and 4. See
page 48, 49, 50 for details.
FT74-78HK.book Page 70 Friday, June 28, 2002 9:45 AM