Panasonic KX-FT78HK - Manual (Page 46)

Receiving Faxes
-46-
TEL mode (answering all calls manually)
Activating TEL mode
If the arrow indicator(s) on the display
point(s) to “TAD” (KX-FT78 only), “FAX” or
both “TEL” and “FAX”, press
{
RECEIVE MODE}.
Receiving a fax manually
1
When the unit rings, lift the handset.
L You can press {MONITOR} (KX-
FT74)/{DIGITAL SP-PHONE} (KX-
FT78).
2
When document reception is required,
a fax calling tone (slow beep) is heard,
or no sound is heard, press
{
FAX/START}.
CONNECTING.....
3
Replace the handset if you are using it.
L The unit will start fax reception.
Note:
L If you do not answer the call within 15
rings:
For KX-FT74:
The unit will temporarily switch to fax
reception. The other party can then send
a fax.
For KX-FT78:
The unit will temporarily activate the
answering device. The greeting
message will then be played and the
other party can then send a fax.
L The received recording paper comes out
somewhat longer than the document
size.
To stop receiving
Press {STOP}.
Friendly reception feature
When you answer a call and hear a fax
calling tone (slow beep), the unit will
automatically start fax reception.
L If this feature is not required, set feature
#46 to off (page 73).
Fax reception in memory (KX-FT78
only)
When a printing problem is detected, the
unit will temporarily store the received
document into memory. While the
document is in memory the display will
show an error message and the following
alternately.
FAX IN MEMORY
L Follow the instructions on page 77 to
solve the problem.
{ FAX/START} {STOP}
{ RECEIVE MODE}
{ MONITOR} (KX-FT74)
{ DIGITAL SP-PHONE} (KX-FT78)
FAX
TEL
TEL MODE
FT74-78HK.book Page 46 Friday, June 28, 2002 9:45 AM