Panasonic PV DR2714 - Manual (Page 20)

20
TV Operation
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
„ Method 1:
Press CH Ÿź. The display will change as follows.
„ Select desired channel:
Press CH Ÿź or NUMBER keys.
„ Adjust desired volume level:
Press VOL + or VOL -.
CHŸź
100 key
Selecting Input Mode
Using the CH/VOL Button
VOL+/-
RAPID
TUNE
MUTE
„ Method 2:
Press INPUT. The display will change as follows. INPUT
AV Input Terminal 2
Notes:
• The diagram at right is an example.
• TV CH 2 and CABLE CH 1 represent the lowest channels in memory,
while TV CH 69 and CABLE CH 125 represent the highest channels in
memory.
LINE2 LINE1 TUNER
LINE 1:
Signal of source connected to AV Input terminal 1 is displayed.
(Rear of the unit.)
LINE 2:
Signal of source connected to AV Input terminal 2 is displayed.
TUNER:
Signal of source connected to VHF/UHF terminal is displayed.
(TV)
CH69
(CABLE)
CH125
LINE2 (TV)
CH2
(CABLE)
CH1
When selecting CABLE channels 100 to 125 with the NUMBER
keys, first press the 100 key, and then enter the remaining two
digits.
Press R-TUNE to display the last channel you were watching.
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
Example 1:
To select channel 125, first press the 100 key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, then 2.
Example 3:
To select channel 2, first press the 0 key, then 2.
Using the Number and 100 keys
Audio Mute
Rapid Tune
LINE1
ACTION
SELECT
ŸźŻŹ/
SET
RETURN
NUMBER
keys