Panasonic PV DR2714 - Manual (Page 46)

46
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Timer Recording
ENTER
REC MODE
NUMBER keys
CANCEL
STOP
ŸźŻŹ
PROG/CHECK
Front Display (Sub Display)
You can enter up to 16 programs up to a month in advance.
(Each daily or weekly program is counted as one program.)
• When connecting a cable TV box or satellite receiver, select the channel
on the cable TV box or satellite receiver before timer recording starts.
3
Press Ÿź to select “New Timer Program,” then
press ENTER.
• Press and hold Ÿź to alter the Start (Start time) and Stop (Finish
time) in 30-minute increments.
• You can also set CHANNEL (Program Position), DATE (See below),
ON (Start time), and OFF (Finish time) with the NUMBER keys.
• You can also press REC MODE to change the recording mode.
Date
Daily timer
Weekly timer
Current date up to one month later
minus on day
SUN-SATĺMON-SATĺMON-FRI
WEEKLY SUNĺ---ĺWEEKLY SAT
• Enter Name: Press ŻŹ to select “Enter Name” and press
ENTER. (p. 66)
4
Press Ź to move through the items and change the
items with Ÿź.
1:58 SP Remaining Recording Time
3/29 MON 12:53.00 PM
TIMER
RECORDING
MODE OFF ON CHANNEL DATE
64
New Timer Program
5:10 PM 4:20 PM SP
CHECK
OK
NO
01 3/29 MON
Press ENTER to store
new program.
1:58 SP Remaining Recording Time
3/29 MON 12:53.00 PM
TIMER
RECORDING
MODE OFF ON CHANNEL DATE
8:00 PM 7:00 PM 4/5 MON 64
Enter Name
SP
Date
Highlighted line is ready
for programming.
1
Press PROG/CHECK to display SET TIMER
PROGRAM screen.
2
Press ŻŹ to select “DVD”, then press ENTER.
SET TIMER PROGRAM
SELECT: SET:SET
END :RETURN
DVD VCR
Set up to 16 Programs
„ Caution for Timer recording
Timer recording automatically starts at the set time.
• Timer recording can be started whether the unit is turned on
or off. When the unit is turned off, the sound and the video
cannot be outputted to the TV.
Add a program
DVD-R RAM
Preparation
• Release protection before proceeding:
- Cartridge (p. 7) RAM
- Disc (p. 63) RAM
• Insert a disc (p. 40) and confirm there is sufficient empty space for
recording on it (p. 41).