Auto playback auto rewind playback auto eject, Commercial skip – Panasonic PV DR2714 User Manual

Page 34

Advertising
background image

34

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Insert a tape in Power off mode.

Power turns on, ĺ Play.

Note:

• Playback begins if tape has no record tab.

Tape reaches its end

Rewind, ĺ Stop.

Tape with no record tab reaches its end

Rewind, ĺ Stop, ĺ Eject.

(except for Recording)

(Repeat Play must be “OFF”)

Auto Playback

Auto Rewind

Playback Auto Eject

Continuously analyzes the signal and adjusts for optimum picture

quality.

Use during Playback and Slow Motion mode to reduce picture

noise. Press CH Ÿź on the Remote Control or the unit until the

picture clears up. To return to Auto Tracking, press POWER off,

then on again a few seconds later.

In Still mode, CH Ÿź operate as a V-Lock control to reduce jitter.

Digital Auto Tracking

Manual Tracking Control

V-Lock Control

1

Press CM/ZERO repeatedly to select skip time in

Playback mode.

By pressing CM/ZERO in Playback mode you can skip over 1, 2,

or 3 minutes of recorded tape as desired.

Note:

• No indication appears.

Commercial Skip

1st Press

1 min skip

OFF

2nd Press

2 min skip

3rd Press

3 min skip

Advertising