Panasonic PV DR2714 - Manual (Page 65)

65
Disc Operation
Finalize
1
Press Ÿź to select “Finalize” and press ENTER.
2
Press ŻŹ to select “Yes” and press ENTER.
3
Press ŻŹ to select “Start” and press ENTER.
• Finalizing starts.
• A message appears when finalizing is finished.
4
Press ENTER.
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP) DVD-R
On
Finalize
Yes No
This will take approximately ×× minutes.
Do you want to continue?
DISC SETTING
Disc Name
Disc Protection
Erase all titles
Format disc
Titles 11
Used 0:22
Free 5:38(EP) DVD-R
On
Finalize
Start Cancel
You will be unable to record on this disc
one it is finalized.
Are you sure you want to continue?
(Refer to “Finalize” on page 74.)
You can play DVD-R on compatible DVD players by finalizing
them on this unit, effectively making them into DVD-Video that
complies with DVD-Video standards.
DVD-R (DVD-R recorded on this unit only)
Notes:
• Do not disconnect the AC power supply cord while the message
“Finalizing the disc” is on the television. This will render the disc
unusable.
• Finalizing takes up to 15 minutes.
• You can only finalize DVD-R that were recorded on this unit.
• You cannot record on DVD-R that have been finalized.
• After finalizing
- The disc becomes play-only and you can no longer record or edit it.
- DVD-R finalized on this unit may not be playable on other DVD players
due to the condition of the recording.
- There is a pause of several seconds between titles.
- Titles are divided into about 5-minute* chapters.
* This time varies greatly depending on the condition and mode of
recording.
• Visit Panasonic’s homepage for more information about DVDs.
For
U.S.A.: http://www.panasonic.com/playDVD-R
For Canada: http://www.panasonic.ca
Before finalizing After finalizing
Disc display on this unit DVD-R DVD-V
Recording/Editing/ Entering
name
ż ×
Play on other DVD players × ż
DVD-R finalized on this unit may not be playable on other DVD players due
to the condition of the recording.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.