Panasonic PV DR2714 - Manual (Page 30)

30
Timer Recording
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
STOP
ADD/DLT
PROG /
CHECK
5
Press RETURN to end the program. To Enter More
Programs, press Ÿź to select and SET to set a
blank program number, and then repeat step 4.
6
Press RETURN to exit this mode.
• If you’re using a cable box, make sure that it is tuned to the desired
channel and the power is left on for timer recording.
1
Press PROG/CHECK to display SET TIMER
PROGRAM screen.
2
Press ŻŹ to select “VCR.”
• If clock was not set correctly, "PLEASE SET CLOCK BY PRESSING
ACTION KEY" is displayed. See pages 17-18 to set the clock.
Repeat step 4 to set:
• Start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, EP)
Set up to 8 Programs
You can set up to 8 programs to be recorded while you are
away.
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT: SET:SET
END :RETURN
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SET COMPLETED
CANCEL:ADD/DLT
SELECT:
SET:SET
END :RETURN
4
Press Ÿź to select and SET or ŻŹ to set the
recording DATE.
• 1~31 = One time
• DAILY (day) = Monday~Friday
• WEEKLY (SU~SA) = Same time once a week
Example:
Today’s Date
WEEKLY
(SA)
7
WEEKLY
(MO)
8
31
1
6
WEEKLY
(SU)
DAILY
(day)
SET TIMER PROGRAM
SELECT: SET:SET
END :RETURN
DVD VCR
3
Press SET to display screen.
• If a program is already in memory, press Ÿź, and SET to select an
unused program number.
Note:
• If the timer recording times of the Disc (DVD-RAM, DVD-R) side and
VCR side overlap, the one with the earliest recording start time will have
priority. If the start times are the same, the Disc side will have priority.
ACTION
SELECT
ŸźŻŹ/
SET
RETURN