Panasonic PV DR2714 - Manual (Page 72)

72
Transfer (Dubbing) from Tape
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PRESS AND HOLD DUBBING
FOR 3 SEC TO START
DUBBING
VCRȲDVD
EP XP
1
With both VCR and DVD in Stop mode, press ĺDVD
and hold down for about 3 seconds after the OSD
below appears.
Dubbing stops automatically when tape playback is finished or at
disc end.
„ To end dubbing
Press STOP.
• When playback (source) side ends and unit enters Stop mode,
or, if dubbing is stopped due to an error, a message will briefly
appear.
3
Dubbing begins. Information is displayed on the
screen and sub display.
Sub Display
VCR side:
• Insert a cassette containing material to be dubbed.
DVD side:
• When using a cartridge style disc, confirm that it is not rewrite
prohibited.
• Be sure there is enough space on the disc to accommodate the
dubbing.
• Select the recording mode. (XP, SP, LP, or EP).
• Disengage the disc protect setting.
Preparation
One Touch Dubbing (Tape ĺ DVD)
You can transfer (dubbing) programs recorded on a tape onto
a disc*1 with one stroke of the button. In One-Touch Dubbing,
programs are automatically dubbed onto the disc from the playback
location on the tape. If you want to transfer (dubbing) from the
desired point, see “Manual Dubbing” on next page.
* 1 Only DVD-RAM and non-finalized DVD-R discs can be used for transfer
(dubbing) from a tape. (see page 7.)
Note:
• Copy protected VHS tapes cannot be dubbed to a disc.
STOP
DVD REC
ĺ DVD
PLAY
PAUSE
„ Only the following operations are allowed while
transferring (dubbing)
• Stopping transfer (dubbing) by pressing STOP.
• Changing channels.
- During dubbing, you can select and watch TV stations using NUMBER
keys and Channel Ÿź keys. To switch back to the dubbing picture,
press DVD or VCR. If it is the dubbing picture, CH is not displayed.
• Selecting input mode by pressing INPUT.
• Turning unit ON/OFF by pressing POWER. (Dubbing will
continue even if power is turned off.)
• Changing audio mode by pressing AUDIO.
DVD-R RAM
REC MODE
AUDIO
DVD
NUMBER
keys
CH Ÿź
INPUT
VCR
Notes:
• While One Touch Transfer (Dubbing) is activated, timer recording cannot
be started.
• When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
2
Tape rewinds to the beginning automatically.