Panasonic PV DR2714 - Manual (Page 39)

39
TV/VCR
Operation
Display Feature
11:00AM CH 08
REC 0:30
STOP
STEREO VCR DVD
SAP EP XP
MONO
1
Press DISPLAY
to display or remove the overlay.
When a function button is pressed (PLAY, FF, etc.) or you change
channels, the unit mode or channel number will be displayed.
Whenever a blank section of a tape comes up in Play mode, or
when the selected channel has no broadcast signal with the Weak
Signal Display Feature set to “OFF” (see page 19), the screen will
turn solid blue.
1 Tape Function Status
5 Current Time
7 Rec Time Remaining
(OTR mode only, see page 29.)
8 Recording Mode
(See page 29.)
4 Receivable Broadcast Types
(See page 21.)
6 Channel
1
4
5
7
6
CH 08
STOP
TV/VCR Status & Clock Display
Blue Screen Display
Channel & Function Display
3
No broadcast signal in TV mode (Only when Weak Signal Display is
set to OFF. (See page 19)), or blank tape is played for 5 minutes.
Power turns off.
Note:
• This feature is canceled if any button is pressed during above conditions.
Auto Shut Off
8
2
3 Disc Function Status
2 Active Indicator
Shows media being
displayed.
DISPLAY
11:00AM CH 08
REC 0:30
STOP
NO V-CHIP DATA
10
9
9 Resume Indicator
(Resume mode only, see page 50.)
10 Rating Status
(See pages 35-38.)
A few seconds.