Panasonic PV DR2714 - Manual (Page 22)

22
TV Timer Features
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PROG /
CHECK
SLEEP
ON-TIMER
Indicator
ADD/DLT
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT:
SET:SET
END :RETURN
This unit can be set to automatically power on in one of 3 modes
(TV, VCR Playback, or Disc.)
Notes:
• If no button on the Remote Control or unit is pressed within 60 minutes
after unit turns itself on, it will turn itself back off.
• If an interactive DVD (with menu) is played back using ON TIMER, the
disc menu will continue to be displayed for operation purposes.
„ To Cancel ON-TIMER,
Repeat step 1. Then, press ADD/DLT to clear the time in
steps 2-3. Now, press RETURN to end. “ON TIMER END”
briefly appears on-screen.
1
Press ON-TIMER to display ON TIMER screen.
2
Press Ÿź to select desired settings.
• When the setup is completed and press SET, “SET COMPLETED” is
displayed.
„ To Make Corrections, use Ÿź and Ż Ź to
move back and correct.
3
Press RETURN to set ON TIMER.
• “ON TIMER SET” is displayed.
This unit can be set for auto power off.
1
Press SLEEP repeatedly to select the desired time.
„ To cancel,
press SLEEP repeatedly until 0 appears.
2
The indication goes off a few seconds after the
adjustment is finished.
Note:
• Pressing DISPLAY with sleep timer set displays remaining time.
• Make sure a tape is inserted if
Playback mode is selected.
• Make sure a disc is inserted if
Disc (DVD/CD) mode is selected.
ON TIMER
10:--AM CH --
SELECT: SET:SET
END :RETURN
ON-TIMER
Sleep Timer
30 60
0 90
ON-TIMER mode selection order
CH01
CH125
DVD
VCR
Lowest
channel
Highest
channel
SLEEP TIMER 30
SELECT
ŸźŻŹ/
SET
RETURN
DISPLAY ON-TIMER