Plasmon LIBRARIES D2175 - Manual (Page 17)

Plasmon D875 - D2175 User Manual Product Overview
Document Revision E Page 15
Import/Export Port (I/E)
The Import/Export port (I/E port) holds one magazine containing ten pieces of media. The port is
located below the five magazine slots and is used to remove and load media while the library is on-line.
Drive Modules
Each drive module contains two 120 mm Multi Drives which accommodate CD-R, CD-RW, DVD-R,
DVD-RAM, or DVD-RW media. The drives allow reading and writing of data to the media. Contact
Plasmon for the latest drive updates.
Main Power Switch and Power Cable
The power cable is routed through the bottom of the library to the power connector. The power switch
is located just above the power connector.
SCSI Interface
The connection between the library and a host computer. The interface to the library is LVD SCSI
using a 68-pin high density connection. The host computer must also be set up for LVD SCSI.
Power Supplies
A maximum of three power supplies may be installed in the library. One power supply can power up to
six drives. Two power supplies are required for 12 drives. Three power supplies provide a redundant
power supply option for the library. The supplies are hot swappable.