Plasmon LIBRARIES D2175 - Manual (Page 77)

Plasmon D875 - D2175 User Manual Appendix D
Document Revision E Page 75
2 Lift motor not homed or
invalid lift position,
Picker edge is blocking
the Tray sensor
3 Picker edge is blocking
the Tray sensor during
a position attempt
55 1 Picker not at
drive Picker not positioned in
front of drive during
load drive attempt Position to drive
2 Picker not positioned in
front of drive during
unload drive attempt
57 1 Pick tray fail VP or Tray sensor
blocked by tray, picker
finger disengaged from
tray after starting to
pick media Alignment
problem Run offsets. Replace tray
2 Picker Tray sensor
blocked on tray only
check after picking tray
3 Picker Tray sensor not
blocked on tray only
check after picking tray
4 Terminated SCSI task
or completion status not
started during a pick
tray retry
58 1 Store tray fail Tray front or back did
not block Tray sensor
during a store Alignment or
obstruction Run offsets, replace tray
2 Both sensors in the flip-
per not made after
store to flipper Alignment,
flipper sen-
sors
3 Picker finger did not
release from the tray
after store attempt, VP
or Pemt blocked Alignment
Error
Code
(hex)
Sub-
code
Error
Description
Subcode
Description
Compo-
nent
Corrective Action