Plasmon LIBRARIES D2175 - Manual (Page 45)

Plasmon D875 - D2175 User Manual Menu System
Document Revision E Page 43
Table 7. Main Menu Selections
Menu Selection Description
1 Library Status Allows viewing only of library settings. To make changes, use the Set Up
menu.
2 Exchange Magazines Use to release the magazine from the library.
3 Turn Drive Off Use to turn off individual drives. Drives may not be hot-swapped in this
mode. For password protected operations, the factory default password is
"AAAA".
4 Turn Drive On Use to turn on individual drives. For password protected operations, the
factory default password is "AAAA".
5 Service Drives Use to remove power from the drive to allow removal or replacement. This
option takes down the entire SCSI bus the drive is on, and all drives associ-
ated with this bus loose SCSI access. For password protected operations,
the factory default password is "AAAA".
6 Restore Drives Use to restore power to the drives after removal or replacement. For pass-
word protected operations, the factory default password is "AAAA".
7 Set Up Library Allows viewing and changing of library settings. When performing opera-
tions from the Set Up menu, the library is taken off-line.
8 Maintenance Mode Allows testing, setting up, or configuring the library. When performing oper-
ations from the Maintenance Mode menu, the library is taken off-line. These
operations are reserved for Plasmon authorized service personnel. For
password protected operations, the factory default password is “AAAA”.