Plasmon LIBRARIES D2175 - Manual (Page 54)

Appendix A Plasmon D875 - D2175 User Manual
Page 52 Document Revision E
1
= Actual number of slots and library capacity depends on drive configuration.
2 = Represents the shipping weight of each expansion bay. The expansion bays are shipped on a
separate pallet.
3
= Additional SCSI busses required depending on number of drives.
Table 11. Media Specifications
Dimensions - Shipping
Height
Width
Depth
Weight
Library
76.5 in (194.3 cm)
49 in (124.5 cm)
37 in (94 cm)
571 lbs (259 kgs) One expansion bay
72.5 in (184.2 cm)
34 in (86.3 cm)
35 in (89 cm)
185 lbs (84 kgs)
2
(see D875 dimensions)
Two expansion bays
72.5 in (184.2 cm)
34 in (86.3 cm)
35 in (89 cm)
325 lbs (148 kgs)
2
(see D875 dimensions)
Operating Temperature 50 to 90F / 10 to 32C
Non - Operating Temperature -40 to 158 F /-40 to 70 C
Operating Humidity 10 to 90% RH (non-condensing)
Operating Voltage 100 to 240 VAC (Auto ranging power supply)
Operating Frequency 50 / 60 Hz
Power Consumption (2
Drives) 145 W / 495 BTU/hr
Power Consumption (12
Drives) 285 W / 972 BTU/hr
If the third power supply is installed, add 37 W / 126 BTU/hr
Options Redundant Power Supplies
Kit for adding two or three SCSI Busses
3
Specification Limits
Environmental
Operating Temperature
(at 1000 ft or less ASL)
Non-Operating Temperature
Max Gradient Temperature / hr
Operating Humidity
Non-Operating Humidity
+10 to +32
o
C (+50 to +90
o
F)
- 40 to +50 o C (- 40 to +122 o F)
10 o C (18 o F per hour)
10 to 85% RH non-condensing
10 to 95% RH non-condensing
Specification D875 D1525 D2175