Library initialization, Removing the packing foam from the mte – Plasmon LIBRARIES D2175 User Manual
Page 21
Plasmon D875 - D2175 User Manual
Library Installation
Document Revision E
Page 19
Figure 6. Removing the Packing Foam from the MTE
Library Initialization
After the protective packaging material is removed the user is prompted on the front panel display to
close the rear door. The library now performs a self-calibration and initialization routine.
NOTE
It may be necessary to reboot the host computer for it to recognize
the library.
Some modifications to the host hardware or operating system may be necessary for it to recognize the
library. These modifications may include patches, driver updates, or modifications to the configuration
files. Please consult the host hardware or operating system documentation to see if any of these
applications apply.
Packing Foam