Plasmon LIBRARIES D2175 - Manual (Page 22)

Library Installation Plasmon D875 - D2175 User Manual
Page 20 Document Revision E
SCSI Connection
Turn the library’s power switch to the off position prior to connecting the SCSI interface.
The library requires a host computer with a dedicated LVD SCSI host bus adapter (HBA). Ensure that
the library is powered off prior to connecting the SCSI cables.
The SCSI cable passes through the bottom of the library into the appropriate SCSI connector inside
the front door of the library.
CAUTION
Ensure the host computer provides an LVD SCSI interface. HVD
SCSI is not compatible with LVD SCSI. If an improper connection
is made, damage to the library or connected equipment could
result.
Figure 7. Connecting the SCSI Interface
SCSI Connection
(one, two, or three buses)