Time lapse shot – Panasonic DMC-TS4 User Manual

Page 105

Advertising
background image

- 105 -

Recording

Applicable modes:
You can set the recording start time, the recording interval and the number of pictures, and
automatically record subjects such as animals and plants as time elapses.

Set the date and time settings in advance.

(P27)

It cannot be recorded into the built-in memory. Please use a card.

Set the recording time/interval/number of pictures

Press

2/1 to select the settings and press 3/4 to

set.

Press [MENU/SET].

Press the shutter button fully.

When the recording time arrives, the recording starts automatically.

If the current time has already passed the set start time, the recording starts when the
shutter button is pressed.

During recording standby, the power will turn off automatically if no operation is
performed for a certain period. The Time Lapse Shot is continued even with the power
turned off. When the recording start time arrives, the power turns on automatically. To
turn on the power manually, press the camera [ON/OFF] button or press and hold [(].

To stop the Time Lapse Shooting partway through, press [MENU/SET] or [(] and end
the recording on the displayed confirmation screen.

[Time Lapse Shot]

Settings

Description of settings

Start time

A

You can set the time to start recording. Any time up to
12 hours ahead can be set.

Recording interval

B

An interval of up to 30 minutes can be set in units of
1 minute.

For certain shutter speed settings, the minimum interval is
5 minutes.

Number of pictures

C

10, 20, 30, 40, 50, 60

Recording warning

D

[u]:

The user is notified that recording is to start by a
warning sound and flashing AF assist lamp.

[s]:

There is no warning sound. Also, the AF assist
lamp doesn’t flash.

A

B

D

C

Advertising